LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2019 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 216 (Lighting System) >> Hazard Lamp Switch >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Genesis G90. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Wrap the protective tape on the tool to disassemble with the screwdriver or remover.
  • Use caution in keeping and handling during disassembling/assembling because it is easily contaminated with lubricant and oil.
  • Use caution for the crash pad garnish and door trim upper garnish made of timber (Real wood) because they can be scratched or picked.
  • Be careful not to scratch the door trim and other parts.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad side garnish.

    (Refer to Body - "CRASH PAD ")

  3. Remove the hazard lamp switch (A) after loosening the screws.
Fig 1: Locating Hazard Lamp Switch With Screws
G11419758Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals