Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.

Remove the rear wheel & tire.
Tightening torque:

88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
Loosen the guide rod bolt (B) and pivot the caliper up out of the way.

Courtesy of

NOTE: Do not loosen the bridge bolt (A) instead of the guide bolt (B).
Remove pad shim (B), pad retainers (C) and brake pads (B) in the caliper bracket (A).

Courtesy of
Loosen the hose eyebolt (B) and caliper mounting bolts (C), then remove the rear caliper assembly (A).
Tightening torque:

Brake hose to caliper (C): 24.5 ~ 29.4 N.m (2.5 ~ 3.0 kgf.m, 18.1 ~ 21.7 lb-ft)

Caliper assembly to knuckle (A): 78.5 ~ 98.1 N.m (8.0 ~ 10.0 kgf.m, 57.9 ~ 72.3 lb-ft)

Courtesy of
Remove the rear brake disc (A) by loosening the screws.

Courtesy of