Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.

Remove the front wheel and tire (A) from the front hub.
Tightening torque:

107.9 - 127.5 N.m (11.0 - 13.0 kgf.m, 79.6 - 94.0 lb-ft)
CAUTION:
- Be careful not to damage the hub bolts when removing the rear wheel and tire (A).
Courtesy of
Remove the front strut assembly.
(Refer to Front Suspension System - "FRONT STRUT ASSEMBLY ")
Disconnect the front upper arm (A) from the front strut assembly bracket (B) by loosening the bolt.
Tightening torque:

98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

Courtesy of
Installation is in the reverse order of removal.
CAUTION:
- Keep mind in upper arm installing angle.
Check the alignment.
(Refer to Tires/Wheels - "ALIGNMENT ")