LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2019 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 191 (Air Conditioning System) >> Duct Sensor >> Repair Procedures >> Replacement >> [Connection Duct Sensor]

[Connection Duct Sensor]

WARNING: This page is about a different car, the 2017 Genesis G90. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the main crash pad assembly.

    (Refer to Body (Interior and Exterior) - "MAIN CRASH PAD ASSEMBLY ")

  3. Disconnect the duct sensor connector (A).
  4. Remove the duct sensor (B) by pulling it out after rotating it 90° in a counterclockwise direction.

    [LH] 

    Fig 1: Locating LH Duct Sensor And Connector
    G11420028Courtesy of HYUNDAI MOTOR AMERICA

    [RH] 

    Fig 2: Locating RH Duct Sensor And Connector
    G11420029Courtesy of HYUNDAI MOTOR AMERICA
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals