Repair Procedures: Replacement

WARNING: This page is about a different car, the 2017 Genesis G90. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative (-) battery terminal.
Remove the mirror wiring cover (A) and auto defogging sensor cover (B).

Fig 1: Locating Mirror Wiring Cover And Auto Defogging Sensor Cover
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the auto defogging sensor connector (A).

Fig 2: Locating Auto Defogging Sensor Connector
Courtesy of HYUNDAI MOTOR AMERICA
Be careful not to damage the cover latch by applying excessive force. To remove the bracket, pull the holes of the bracket outside using a small flat-head screwdriver (A).

Fig 3: Pulling Holes Of Bracket Outside Using Small Flat-Head Screwdriver
Courtesy of HYUNDAI MOTOR AMERICA
To install, reverse the removal procedure.