LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2019 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 191 (Air Conditioning System) >> AC Pressure Transducer >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different car, the 2017 Genesis G90. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Recover the refrigerant with a recovery/charging station.
  3. Disconnect the A/C pressure transducer connector (A).
    Fig 1: Locating A/C Pressure Transducer Connector
    G11419974Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the A/C pressure transducer (A).
    Fig 2: Locating A/C Pressure Transducer
    G11419975Courtesy of HYUNDAI MOTOR AMERICA
    CAUTION: Be careful not to bend the liquid & suction pipe.
  5. To install, reverse the removal procedure.
    NOTE: When installing, replace it with a new O-ring.
scientia non olet · About LEMON Manuals