LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2019 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 168 (Automatic Transmission Control System) >> Parking Body >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2017 Genesis G90. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
    CAUTION:
    • Carefully install standard the bolt & washer (3, 4) not to change with other bolts.
    • When install parking body mounting bolts, standard bolts (3, 4) installed for the first time.
    • Install the parking body bolts as following method. (3→4→1→2)
    • Tighten the parking body mounting bolts to specifications.
    • The parking body load pin (A) install in the opposite direction of the valve body.
    Fig 1: Locating Parking Body Load Pin
    G11404876Courtesy of HYUNDAI MOTOR AMERICA
  2. Fill the oil about 7.0 liters through ATF injection hole.
  3. Check the ATF level.

    (Refer to Hydraulic system - "FLUID ")

    CAUTION: After ATF level check or exchange, be sure to remove residual ATF on transmission case. (Be especially sure to remove residual ATF between automatic transmission case and valve body cover) -
scientia non olet · About LEMON Manuals