LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2019 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 127 (Tires/Wheels/Wheel Alignment) >> Tire >> Repair Procedures >> Notes

Repair Procedures: Notes

WARNING: This page is about a different car, the 2017 Genesis G90. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Tires and wheel other than those of the recommended sizes may cause unusual handling and poor vehicle control, resulting in a serious accident.

Tire Wear 

  1. Measure the tread depth of the tires.

    Tread Depth [Limit]:  1.6 mm (0.0630 in.)

  2. If the remaining tread depth (A) is less than the limit, replace the tire.
    NOTE:
    • When the tread depth of the tires is less than 1.6 mm(0.063 in), the wear indicators (B) will appear.
    Fig 1: Checking Tread Depth Of Tires Measurement
    G11407594Courtesy of HYUNDAI MOTOR AMERICA