Repair Procedures: Inspection: Toe

WARNING: This page is about a different car, the 2017 Genesis G90. However, it is still accessible from the selected car via links, so may be relevant.

Toe

Total: 0.2° ± 0.2°

Individual: 0.1° ± 0.1°

Tightening Torque

49.0 - 63.7 N.m (5.0 - 6.5 kgf.m, 36.2 - 47.0 lb-ft)

Fig 1: Tightening Tie Rod End Lock Nuts

Courtesy of HYUNDAI MOTOR AMERICA

NOTE:

Make sure that each toe value remains within ±0.1° of the other. If the difference in the toe value between the right and left wheel exceeds ±0.2°, re-adjust the toe accordingly.
After adjusting the toe, apply the standard torque to tighten the tie rod adjustment nut (A).
Rotate the tie rod buckle to adjust the toe. Turn the tie rod towards the rear of the vehicle to reduce the toe of the left front wheel. Be sure to make equal adjustments to the toe on both the right and left wheels by turning the tie rod.

Camber

Camber refers to the tilt of the center of the wheel.