LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2019 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 124 (Blind Spot Detection System) >> Blind spot detection switch >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Genesis G90. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the Negative (-) Battery Terminal.
  2. Remove the crash pad lower panel.

    (Refer to Body - "LOWER CRASH PAD PANEL [RH] ")

  3. Remove the crash pad garnish [LH].

    (Refer to Body - "CLUSTER FASCIA PANEL ")

  4. Remove the Blind Spot Detection (BSD) switch (A) after disengaging the mounting clip.
Fig 1: Locating Blind Spot Detection Switch
G11419899Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals