[General Console]

CAUTION:

NOTE:

When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
When removing the interior trim pieces, use a plastic panel removal tool not to damage the surface.
Take care not to bend or scratch the trim and panels.

Remove the Rear Seat Cushion Assembly.
(Refer to Rear Seat - "REAR SEAT ASSEMBLY ")
Remove the Rear Seat Back Assembly.
(Refer to Rear Seat - "REAR SEAT ASSEMBLY ")
Disconnect the Connector (A).
[LH]

Courtesy of HYUNDAI MOTOR AMERICA

[RH]

Courtesy of HYUNDAI MOTOR AMERICA

[Center]

Courtesy of HYUNDAI MOTOR AMERICA
After loosening the Mounting Bolts, remove the Rear Console Assembly (A).

Courtesy of HYUNDAI MOTOR AMERICA
To install, reverse the removal procedure.
Information
- Replace any damaged Clips (or pin-type Retainers).
- Make sure the connector is connected properly.