Repair Procedures: Installation
- Install the wiper motor and linkage assembly and then connect the wiper motor connector.
Tightening Torque:
6.9 - 10.8 Nm (0.7 - 1.1 kgf.m, 5.0 - 7.9 lbf.ft)
- Install the cowl top cover.
- Install the windshield wiper arm and blade.
Tightening Torque:
22.5 - 26.5 Nm (2.3 - 2.7 kgf.m, 16.6 - 19.5 lbf.ft)
NOTE:- The windshield wiper motor must be cycled to make sure that it is in the park position.
If necessary, adjust the wiper arm and blade.
- The windshield wiper motor must be cycled to make sure that it is in the park position.
- Install the wiper arm and blade to the specified position.
- Auto stop position (Blade)