LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2019 >> G80 5.0 Ultimate, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 5.0L >> Camshaft Position Sensor (CMPS) >> Repair Procedures >> Removal >> [Bank 2/Intake]

[Bank 2/Intake]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the camshaft position sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor.
    G12661583Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals