Repair Procedures: Removal

Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported.
Remove the front wheel and tire (A) from the front hub.
Tightening Torque:

107.9 - 127.5 N.m (11.0 - 13.0 kgf.m, 79.6 - 94.0 lb-ft)

Courtesy of HYUNDAI MOTOR AMERICA

NOTE: Be careful not to damage the hub bolts when removing the front wheel and tire.
Loosen the nut (A) and disconnect the stabilizer link from the front strut assembly.
Tightening Torque:

98.1 ~ 117.7 N.m (10.0 ~ 12.0 kgf.m, 72.3 ~ 86.8 lb-ft)

[ECS]

Courtesy of HYUNDAI MOTOR AMERICA

[HPD]

Courtesy of HYUNDAI MOTOR AMERICA
Remove the under cover (A) & (B).

Courtesy of HYUNDAI MOTOR AMERICA
Loosen clamp mounting bolts and then separate the stabilizer bar from the subframe.
Tightening Torque:

49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft)

[4WD]

Courtesy of HYUNDAI MOTOR AMERICA

[2WD]

Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order of removal.
Check the alignment.
(Refer to Tires/Wheels - "ALIGNMENT ")