LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2019 >> G80 3.8, AWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Integrated Gateway Power Control Module Diagnosis >> DTC C166D-00: CAN Time-Out HUD >> Verification Of Repair >> Verification Of Vehicle Repair

Verification Of Vehicle Repair

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect GDS and select "Diagnostic Trouble Codes (DTC)"  mode.
  2. Erase the DTCs and Operate the vehicle within DTC Enable conditions in General Information.
  3. Is any DTC output again?

    YES 

    • Go to the applicable Troubleshooting (DTC INDEX ) procedure.

    NO 

    • System performing to specification at this time.
scientia non olet · About LEMON Manuals