DTC Information: DTC Detecting Condition

Item		Conditions For Setting DTC	Possible Cause
DTC Strategy		Check CAN Communication	Faulty BCM
Enable Conditions		Power voltage 9~16V B_CAN network is activating B_CAN bus is normal B_CAN bus is not Limp Home mode B_CAN network monitoring is complete
Threshold Value		There is a mismatch between IG key signal of "GATEWAY" and IG key B_CAN signal data BCM
Diagnostic Time		5 sec
Cancellation	Active DTC	Erased DTC after solved problem
Cancellation	History DTC	Can be erased by GDS