Repair Procedures: Removal
CAUTION:
The dust or foreign substance on the rain sensor has a bad effect upon the rain sensor capability, so protect the sensor surface with protection cover until installing the rain sensor to bracket for accurate function.
The coupling pad on the rain sensor surface has adhesive strength, so the coupling pad could stick to the windshield by environment condition during the using time.
If the rain sensor is removed by force, it could be damaged. So make sure to separate the rain sensor from the windshield carefully.
The coupling pad on the rain sensor surface has adhesive strength, so the coupling pad could stick to the windshield by environment condition during the using time.
If the rain sensor is removed by force, it could be damaged. So make sure to separate the rain sensor from the windshield carefully.
- Disconnect the negative (-) battery terminal.
- Remove the mirror wiring cover (B) and rain sensor cover (A).
- Disconnect the rain sensor connector (A).
- Be careful not to damage the cover latch by applying excessive force. To remove the bracket, pull the holes of the bracket outside using a small flat-head screwdriver.
- Rain sensor module is attached to the front windshield by glue. When replacing the front windshield, remove the rains sensor module form the existing front windshield and install it on the new front windshield.