LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2019 >> G70 2.0T Advanced, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Front View Camera System >> Repair Procedures >> Variant Coding >> High Beam Assist (HBA)

High Beam Assist (HBA)

NOTE: The system may not operate normally in the below conditions.
  • When the light from the oncoming or front vehicle is not detected because of lamp damage, hidden from sight, etc.
  • When the lamp of the oncoming or front vehicle is covered with dust, snow or water.
  • When the light from the oncoming or front vehicle is not detected because of exhaust fume, smoke, fog, snow, etc.
  • When the front window is covered with foreign matters such as ice, dust, fog, or is damaged.
  • When there is a similar shape lamp with the front vehicle's lamps.
  • When it is hard to see because of fog, heavy rain or snow.
  • When the headlamp is not repaired or replaced at an authorized dealer.
  • When headlamp aiming is not properly adjusted.
  • When driving on a narrow curved road or rough road.
  • When driving downhill or uphill.
  • When only part of the vehicle in front is visible on a crossroad or curved road.
  • When there is a traffic light, reflecting sign, flashing sign or mirror.
  • When the road conditions are bad such as being wet or covered with snow.
  • When the front vehicle's headlamps are off but the fog lamps on.
  • When a vehicle suddenly appears from a curve.
  • When the vehicle is tilted from a flat tire or being towed.
  • When the LDW/LKA warning light illuminates.
  • Replace Front View Camera with a new one
  • Windshield glass changed