LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2018 >> G80 5.0 Ultimate, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 42 (Engine Control System - 3.8L) >> Camshaft Position Sensor (CMPS) >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • Install the component with the specified torques.
  • Note that internal damage may occur if the component drops. If the component drops, inspect it before installation.
CAUTION:
  • Apply the engine oil to the O-ring.
CAUTION:
  • Insert the sensor in the installation hole and be careful not to damage during installation.
CAUTION:
  • Be careful not to damage the sensor housing and the connector.
  • Be careful not to damage the O-ring.
  1. To install, reverse the removal procedure.

    Camshaft Position Sensor Installation Bolt: 

    6.9 - 9.8 N.m (0.7 - 1.0 kgf.m, 5.1 - 7.2 lb-ft)

scientia non olet · About LEMON Manuals