LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2018 >> G80 5.0 Ultimate, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (4WD Control Diagnosis) >> DTC P3105: Control Module - Failure External Watchdog Disabled >> Verification Of Repair >> Verification Of Vehicle Repair

Verification Of Vehicle Repair

WARNING: This page is about a different variant/trim than selected.

After a repair, it is essential to verifying that the fault has been corrected.

  1. Connect GDS and select "Diagnostic Trouble Codes (DTC)  " mode.
  2. Using GDS, Clear DTC.
  3. Check DTCs in other system after fixing the vehicle.

    (If there is the DTC representing "4WD CAN Time-Out", Clear the DTC.)

  4. Are any DTCs present?

    YES 

    • Go to the applicable Troubleshooting (DTC INDEX ) procedure.

    NO 

    • System is performing to specification at this time.
scientia non olet · About LEMON Manuals