LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2018 >> G80 5.0 Ultimate, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 5.0L >> Camshaft Position Sensor (CMPS) >> Repair Procedures >> Removal >> [Bank 1]

[Bank 1]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the camshaft position sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor.

    [Bank 1/Intake] 

    G12661581Courtesy of HYUNDAI MOTOR AMERICA

    [Bank 1/Exhaust] 

    G12661582Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals