LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2018 >> G80 3.8, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis - 3.8L (3 Of 3) >> DTC P2610: ECM/PCM-Engine Off Timer Performance >> Wiring Inspection >> Terminal And Connector Inspection

Terminal And Connector Inspection

  1. Disconnect the Battery terminals and ECM (PCM) connectors and inspect for looseness, poor connection, bending, corrosion, contamination, deterioration or damage. Reconnect the connectors.
  2. Connect the GDS and go to "Current Data". 
  3. Monitor ECM (PCM) sensor values in Current Data, check and wiggle the harness (es), connector (s), and terminal (s).
  4. Any change in the values indicates a poor connection. Was a connector problem found?

    YES 

    NO 

scientia non olet · About LEMON Manuals