LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2018 >> G80 3.8, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Engine Control System - 3.3L) >> RCV Control Solenoid Valve >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the RCV control solenoid valve connector (A) and vapor hose (B).
  3. Remove the RCV control solenoid valve (D), after loosen the bolts (C).
    G12663772Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals