LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2018 >> G80 3.8, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Engine Control System - 3.3L) >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the Ignition Switch OFF and disconnect the battery negative (-) cable.

    (Refer to Engine Mechanical System - "INTAKE AND EXHAUST SYSTEM - 3.3L ")

  2. Disconnect the ETC Module connector (A).
  3. Disconnect the coolant hose (B).
  4. Remove the ETC Module from the engine after loosening the Installation Bolt (C).
    G12663637Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals