LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2018 >> G80 3.8 Ultimate, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control Diagnosis >> DTC C1260: Steering Angle Sensor Circuit-Signal >> DTC Inspection >> Monitor DTC Status

Monitor DTC Status

  1. Connect GDS and select "Diagnostic Trouble Codes (DTC)"  mode.
  2. Confirm that "DTC Readiness Flag" indicates "COMPLETED". If not, drive the vehicle within conditions noted in the freeze frame data or enable conditions.
  3. Read "DTC Status" parameter in DTC menu of the GDS.
    G12654397Courtesy of HYUNDAI MOTOR AMERICA
  4. Is parameter displayed "History (Not Present) Fault"?
scientia non olet · About LEMON Manuals