Repair Procedures: Removal

Remove valve core and deflate the tire.
Remove the bead area in the side of the tire from the wheel using the tire changing machine.

Fig 1: Removing Bead Area In Side Of Tire From Wheel Using Tire Changing Machine
Courtesy of HYUNDAI MOTOR AMERICA
NOTE:
- The tire bead should be broken approx. 90° from the valve side of the wheel. The bead breaker should not be set too deep.
- Avoid tire/tool contact with the valve on dismount.
- Dismount should end near the valve.
Rotatse the wheel clockwise.

Fig 2: Rotating Wheel Clockwise (1 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA

Fig 3: Rotating Wheel Clockwise (2 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA