LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2017 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Control System - 3.3L) >> RCV Control Solenoid Valve >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the RCV control solenoid valve connector (A) and vapor hose (B).
  3. Remove the RCV control solenoid valve (D), after loosen the bolts (C).
Fig 1: RCV Control Solenoid Valve, Connector, Installation Bolts And Vapor Hose
G11412246Courtesy of HYUNDAI MOTOR AMERICA