LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2017 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Control System - 3.3L) >> Boost Pressure Sensor (BPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the boost pressure sensor connector (A).
  3. Remove the boost pressure sensor after removing the mounting Bolts (B).
    Fig 1: Boost Pressure Sensor Connector And Mounting Bolts
    G11412139Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals