Repair Procedures: Removal

WARNING: This page is about a different car, the 2016 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.

Move the shift lever to "N" range.
Disconnect the battery negative (-) cable.
Remove the knob (A) and boots (B) by pulling them in the direction of the arrow after separating the boots from the console upper cover.

Fig 1: Removing Knob And Boots
Courtesy of KIA MOTORS AMERICA, INC.
Remove the floor console assembly.
(Refer to Body - "CONSOLE ")
Disconnect the main connector (A).

Fig 2: Locating Main Connector
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the wiring from the shift lever.

Fig 3: Disconnecting Wiring From Shift Lever
Courtesy of KIA MOTORS AMERICA, INC.
Remove the shift cable (A) from the shift lever.

Fig 4: Removing Shift Cable From Shift Lever
Courtesy of KIA MOTORS AMERICA, INC.
Remove the shift lever assembly (A).
Tightening Torque:

8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

Fig 5: Removing Shift Lever Assembly
Courtesy of KIA MOTORS AMERICA, INC.