LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2017 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 315 (Automatic Transaxle Control System) >> Line Pressure Control Solenoid Valve >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2016 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Remove the battery and battery tray.

    (Refer to Engine Electrical System - "BATTERY ")

  3. Disconnect the solenoid valve connector (A).
    Fig 1: Locating Solenoid Valve Connector
    G11856902Courtesy of KIA MOTORS AMERICA, INC.
  4. Measure the resistance between power terminal (5) and signal terminal (17).

    Specification:  5.1 ± 0.3 Ω

    Fig 2: Solenoid Valve Connector Terminal
    G11856903Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals