Remove the compression arm

1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported
2. Remove the front wheel and tire (A) from the front hub.

   Tightening torque: 

   107.9 - 127.5 N.m (11.0 - 13.0 kgf.m, 79.6 - 94.0 lb-ft)

   Courtesy of

   NOTE: Be careful not to damage the hub bolts when removing the front wheel and tire.
3. Loosen the nut and then remove the compression arm from knuckle.

   Tightening torque 

   88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

   Courtesy of

4. Loosen the flange bolt & lock nut, remove the compression arm (A).

   Tightening torque: 

   137.3 ~ 156.9N.m (14.0 ~ 16.0kgf.m, 101.3 ~ 115.7lb-ft)

   Courtesy of

   Courtesy of

5. Install in the reverse order of removal.
6. Check the alignment.

   (Refer to Tires/Wheels - "ALIGNMENT ")

[2WD]