LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2017 >> G80 3.8 Ultimate, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Control System >> Inhibitor Switch >> Repair Procedures >> Inspection >> Signal Circuit Inspection

Signal Circuit Inspection

  1. Connect the Inhibitor switch connector.
  2. Turn the ignition key ON and the engine OFF.
  3. Measure voltages between each terminal and chassis ground while the shift lever changes from P to R, N and D.

    Specification:  See below "SIGNAL CODE TABLE "

scientia non olet · About LEMON Manuals