Removal Procedure
- Raise and support the vehicle. Lifting and Jacking the Vehicle
Disconnect the front wheel speed sensor and brake pad wear sensor electrical connectors (1).
- Wheel Speed Sensor Wiring Harness Retainer (2) - Remove [2x]
- Front Wheel Speed Sensor Bolt (3) @ Bracket - Remove [2x]
Front Wheel Speed Sensor Bolt (1) - Remove
- Wheel Speed Sensor Wiring Harness Retainer (2) - Remove [3x]
- {If equipped} Remove and DISCARD the wheel speed sensor bracket and bolt.
- Disconnect the front disc brake pad wear sensor electrical connector (3).
- Wheel Speed Sensor Wiring Harness Retainer (4) - Remove
Front Wheel Speed Sensor (1) - Remove
NOTE:
Due to a design change, some older models have a bracket for retaining the wheel speed sensor. Removal is required for installation of updated wheel speed sensor.