Installation Procedure
Communication Interface Module Battery (2) - Install
- Communication Interface Module Battery Bolt (1) - Install and tighten - Fastener Specifications
Telematic Control Module (1) - Install
- Secure the retaining tabs.
- Connect the electrical connectors.
- WARNING:
Upon installing the floor duct to the side of the HVAC case, it is necessary to verify duct opening is completely installed, surrounding the HVAC case outlet port. Failure to do so could result in the duct falling downward, with the potential to interfere with driver's legs and gas/brake pedal operation.
Floor Front Air Outlet Duct - Left Side (1) - Install
Floor Front Air Outlet Duct Bolt (1) - Install and tighten - Fastener Specifications
CAUTION:
Refer to Fastener Caution .