Installation Procedure
Battery (1) - Install
Battery Hold Down Retainer (2) - Install
- Battery Hold Down Retainer Bolt (1) - Install and tighten - Fastener Specifications
Battery Hold Down Strap (2) - Install
- Battery Tray Stop Bolt (3) - Install and tighten - Fastener Specifications
- Battery Tray Bolt (1) - Install and tighten - Fastener Specifications
Battery Distribution Engine Compartment Fuse Block (3) - Install
- Battery Positive Post Clamp Nut (1) - Tighten - Fastener Specifications
- Electrical Connector (2) - Connect
Front Compartment Fuse Block Cover (2) - Install
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection (- K4Z) , or Battery Negative Cable Disconnection and Connection (K4Z)
CAUTION:
Refer to Fastener Caution