LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2024 >> Sierra 1500 AT4, 3.0L Eng VIN 8 >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Programming And Setup - All Systems) >> Repair Instructions >> K19 Suspension Control Module: Programming and Setup >> Reprogram Control Module

Reprogram Control Module

WARNING: This page is about a different car, the 2023 GMC Sierra 1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Access the Service Programming System (SPS) and follow the on-screen instructions.
  2. On the SPS Supported Controllers screen, select K19 Suspension Control Module - Programming and follow the on-screen instructions.
  3. Clear DTCs.
  4. With a scan tool, perform the suspension system calibration procedure, if applicable.
scientia non olet · About LEMON Manuals