Removal Procedure
- Extend the steering column to its furthest point to allow the instrument panel steering column upper trim cover to clear the instrument panel.
Using a small plastic trim tool, separate the instrument panel steering column upper trim cover (1) from the instrument panel steering column lower trim cover.
- Instrument Panel Steering Column Upper Trim Cover (1) - Reposition
Turn the steering wheel approximately 90 degrees to the right of the centered position.
- Instrument Panel Steering Column Lower Trim Cover Bolt (1) - Remove
Turn the steering wheel approximately 90 degrees to the left of the centered position.
- Instrument Panel Steering Column Lower Trim Cover Bolt (1) - Remove
Turn the steering wheel to the centered position.
- Instrument Panel Steering Column Lower Trim Cover Bolt (1) - Remove
- Instrument Panel Steering Column Lower Trim Cover (2) - Remove
- NOTE:
Some components not shown for graphic clarity.
Disconnect the electrical connector. (3)
- Automatic Transmission Electronic Control Bolt (1) - Remove [2x]
- Gear Shift Control Module (2) - Remove