Installation Procedure

CAUTION:

Front Seat Belt Retractor Bolt (1) - Install and tighten - Fastener Specifications
Connect the electrical connector and install the wiring harness retainers as necessary.
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Some components not shown for graphic clarity.

Front Seat Belt Anchor Plate Tensioner (2) - Install
Front Seat Center Belt Anchor Plate Bolt (1) - Install and tighten [2x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Some components not shown for graphic clarity.

Front Seat Belt Guide Bolt (1) - Install and tighten - Fastener Specifications
Push Pin (2) - Install
Courtesy of GENERAL MOTORS COMPANY

Center Pillar Lower Garnish Molding (1) - Install
Ensure the seat belt webbing does not become trapped during installation.
Courtesy of GENERAL MOTORS COMPANY

Rear Side Door Sill Garnish Molding (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Front Side Door Sill Garnish Molding (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Center Pillar Upper Trim Panel (3) - Install
Center Pillar Upper Garnish Molding Bolt (2) - Install and tighten - Fastener Specifications
Center Pillar Upper Trim Panel Bolt Cap (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Front Seat Belt Anchor Plate Tensioner Bolt (2) - Install and tighten - Fastener Specifications
Front Seat Belt Anchor Plate Tensioner Cover (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Center Pillar Lower Garnish Molding Lower Hole Cover (1) - Install
Enable the SIR System. SIR Disabling and Enabling