Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Remote Function Actuator Module (1) - Install
Secure the retaining tabs.
Connect the electrical connector.
Courtesy of GENERAL MOTORS COMPANY

Ensure the seat belt webbing in not caught by panel clip tower and is in front of it.
Body Lock Pillar Garnish Molding (3) - Install

CAUTION:

Body Lock Pillar Garnish Molding Bolt (2) - Install and tighten - Fastener Specifications
Center Pillar Upper Trim Panel Bolt Cap (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Front Seat Belt Anchor Plate Tensioner Bolt (2) - Install and tighten - Fastener Specifications
Front Seat Belt Anchor Plate Tensioner Cover (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Rear Window Lower Garnish Molding (1) - Install
Return the seat to its original position.
Enable the SIR System. SIR Disabling and Enabling