LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2022 >> Terrain AT4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 276 (Frame And Underbody) >> Specifications >> Fastener Specifications

Fastener Specifications

WARNING: This page is about a different car, the 2021 GMC Terrain and 2021 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Threaded Fastener/Component Tightening Specifications

NOTE:

All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. 

Application Specification
Metric (English)
Front Cradle Brace Bolt
  • First Pass:
58 N.m (43 lb-ft)
  • Final Pass:
30 - 45 Degrees
Rear Suspension Cradle Mounting Bolt - Large
  • First Pass:
90 N.m (66 lb-ft)
  • Final Pass:
90 - 105 Degrees
Reusable Threaded Fastener Tightening Specifications

NOTE:

All fasteners listed in this table can be reused after removal. 

Application Specification
Metric (English)
Drivetrain and Front Suspension Cradle Mounting Bolt 175 N.m (129 lb-ft)
Front Compartment Air Deflector Bolt 2.5 N.m (22 lb/in)
Front Tire Front Air Deflector Bolt 2.5 N.m (22 lb/in)
Front Wheelhouse Liner Bolt 2.5 N.m (22 lb/in)
Rear Bumper Fascia Bolt 2.5 N.m (22 lb/in)
Rear Suspension Cradle Mounting Bolt - Small 100 N.m (74 lb-ft)
Rear Tire Front Air Deflector Bolt 2.5 N.m (22 lb/in)
Rear Wheelhouse Liner Bolt 2.5 N.m (22 lb/in)
Rear Wheelhouse Liner Rear Brace Bolt (Equinox) 2.5 N.m (22 lb/in)
Rear Wheelhouse Liner Rear Brace Bolt (Terrain) 9 N.m (80 lb/in)
Underbody Rear Air Deflector Bolt 5 N.m (44 lb/in)
Underbody Rear Air Deflector Nut 3 N.m (27 lb/in)