Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Drive Motor Battery Coolant Level Sensor (2) - Install
Clip (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Electrical Connector (1) @ Drive Motor Battery Coolant Level Sensor - Connect
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Some components not shown for graphic clarity.

Drive Motor Control Module Radiator Outlet Hose (2) - Install
Drive Motor Control Module Radiator Outlet Hose (2) @ Hybrid/Electric Vehicle Battery Coolant Pump - Install
Drive Motor Control Module Radiator Outlet Hose (2) @ Hybrid/EV Propulsion System Coolant Control Valve 1 - Install
Retainer (1) - Engage [2x]
Courtesy of GENERAL MOTORS COMPANY

Connect and position the wiring harness.
Drive Motor Control Module Radiator Outlet Hose (1) @ Hybrid/EV Propulsion System Coolant Control Valve 1 - Install [2x]
Retainer (2) - Engage [2x]
Courtesy of GENERAL MOTORS COMPANY

Drive Motor Control Module Radiator Outlet Hose (2) @ Engine Radiator - Install
Retainer (1) - Engage
Courtesy of GENERAL MOTORS COMPANY

Radiator Outlet Hose Clip (1) @ Engine Cooler Fan - Engage
Fill the cooling system to the proper level. Drive Motor Battery Cooling System Draining and Filling
Inspect for coolant leaks.
Courtesy of GENERAL MOTORS COMPANY

Front Trim Finish Compartment (2) - Install - Front Trim Finish Compartment Removal and Installation