Common Specs & Procedures Index
COMMON SPECS & PROCEDURES
| SYSTEM | SPECIFICATION/PROCEDURE | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | Approximate Fluid Capacities | ||
| Torque | Fastener Specifications | ||
| Wheel Drive Shaft Nut | |||
| Front, Rear | First pass - 244 lb ft (330 N.m) Second pass - Loosen 45° Final pass - 199 lb ft (270 N.m) |
||
| Brakes | |||
| Bleeding Sequence | RR, LR, RF, LF See Hydraulic Brake System Bleeding | ||
| Disc Brakes | |||
| Service Specifications | Disc Brake Component Specifications | ||
| Torque | Fastener Specifications | ||
| Cooling System | |||
| Electric Vehicle | Approximate Fluid Capacities | ||
| Wheel Alignment | |||
| Adjustment Specifications | Wheel Alignment Specifications | ||
| Torque | Fastener Specifications | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 140 lb ft (190 N.m) Using a torque wrench and the appropriate socket, evenly tighten the 8 wheel nuts (1) in a crisscross pattern. See tightening sequence illustration under tire |
||