LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2022 >> Hummer EV >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Immobilizer System >> Diagnostic Information and Procedures >> DTC P0513 >> Circuit/System Verification

Circuit/System Verification

  1. Verify there are no immobilizer DTCs set in the K9 Body Control Module.
    • Go to next step: If no immobilizer DTCs are set in the K9 Body Control Module 
  2. Perform the K9 Body Control Module immobilizer learn using the Body Control Module IMMO Function with Existing Transponder or Remote Key in SPS. Refer to Immobilizer System Component Programming .
  3. Verify the engine starts after the K9 Body Control Module completes the learn procedure.
    • If the vehicle does not power on 

      Perform the K107 Drive Motor Control Module immobilizer learn using the Drive Motor Control Module IMMO Function with Existing Transponder or Remote Key in SPS. Refer to Immobilizer System Component Programming .

    • Go to next step: If the vehicle powers on 
  4. All OK.
scientia non olet · About LEMON Manuals