LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2022 >> Canyon AT4, 2.8L Eng VIN 1 >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup >> Repair Instructions >> K43 Power Steering Control Module: Programming and Setup >> Replace and Program Control Module

Replace and Program Control Module

NOTE:

When replacing the entire steering gear, follow the steps for Reprogram Control Module.

To program a replacement power steering control module, perform the following procedure:

  1. Ignition ON.
  2. Access the Service Programming System (SPS) and follow the on-screen instructions.
  3. On the SPS Supported Controllers screen, select K43 Power Steering Control Module - Programming and follow the on-screen instructions.
  4. Clear DTCs.
  5. On the SPS Supported Controllers screen, select K43 Power Steering Control Module - Setup and follow the on-screen instructions.
  6. Clear DTCs.
scientia non olet · About LEMON Manuals