LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2021 >> Yukon AT4 >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Wheel And Column >> Repair Instructions >> Steering Wheel Replacement >> Removal Procedure

Removal Procedure

  1. Disable the SIR system. SIR Disabling and Enabling
  2. GM5520780Courtesy of GENERAL MOTORS COMPANY

    Use a flat bladed trim tool to depress the steering wheel airbag access hole cover detents to remove the 2 steering wheel airbag access hole covers (1).

  3. GM5525856Courtesy of GENERAL MOTORS COMPANY

    Steering Wheel Airbag Bolt (1) - Remove [ 2x ]

  4. Release the connector position assurance (CPA) retainer.
  5. Disconnect the electrical connectors.
  6. Steering Wheel Airbag (2) - Remove
  7. GM5525860Courtesy of GENERAL MOTORS COMPANY

    Loosen the steering wheel bolt (1) so that 2 - 3 threads are engaged.

  8. Wiggle the steering wheel until the wheel disengages completely.
  9. Steering Wheel Bolt (1) - Remove
  10. Steering Wheel (2) - Remove
scientia non olet · About LEMON Manuals