Installation Procedure

WARNING: This page is about a different car, the 2020 GMC Terrain and 2020 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Windshield Washer Solvent Container (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Windshield Washer Solvent Container Nut (1) - Install and tighten9N.m (80 lb in)
Courtesy of GENERAL MOTORS COMPANY

Windshield Washer Solvent Container Bolt (1) - Install and tighten [2x]9N.m (80 lb in)
Courtesy of GENERAL MOTORS COMPANY

Install both windshield washer solvent container hoses (1, 3)to the windshield washer solvent container retainer. (5)
Windshield Washer Pump Hose- Front (3) @ Windshield Washer Pump (4) - Install
Windshield Washer Pump Hose- Rear (1) @ Rear Window Washer Pump (2) - Install
Connect the electrical connectors.
Courtesy of GENERAL MOTORS COMPANY

Windshield Washer Solvent Container Bolt (1) - Install and tighten9N.m (80 lb in)
Remove the clean suitable drain pan from under the windshield washer solvent container.
Headlamp-Left Side - Install - Front Headlamp Replacement (Chevrolet) , or Front Headlamp Replacement (GMC)
Front Bumper Fascia - Install Front Bumper Fascia Removal and Installation (Equinox) , or Front Bumper Fascia Removal and Installation (Terrain)
Lower the vehicle. Lifting and Jacking the Vehicle
Fill the windshield washer system to the proper level.