Installation Procedure
WARNING: This page is about a different car, the 2020 GMC Terrain and 2020 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
Battery Monitor Module (2) - Install
- Battery Negative Post Clamp Nut (1) - Tighten 4.5 N.m (40 lb in)
Electrical Connector (2) - Connect
- Battery Negative Cable (3) - Install
- Battery Negative Cable Nut (1) - Tighten 9 N.m (80 lb in)
- Perform the battery sensor learn procedure. Battery Sensor Module Learn
CAUTION:
Refer to Fastener Caution