Circuit/System Verification

NOTE:

Since most occurrences of this DTC are caused by excessive brake usage, review with the customer the conditions under which the DTC set.

Verify that no other DTCs are set.
- If any other DTCs are set
  Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- Go to next step: If no other DTCs are set
Verify DTC C026E does not set while driving the vehicle under normal braking conditions.
- If the DTC sets
  Replace the K17 Electronic Brake Control Module.
- Go to next step: If the DTC does not set
All OK.