Fastener Specifications
Single Use Non - Threaded Fasteners / Components
|
NOTE:
All fasteners / components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Catalytic Converter Gasket |
| Exhaust Front Pipe Gasket |
| Exhaust Manifold Gasket |
| Exhaust System Seal |
| Exhaust Turbocharger Inlet Pipe Gasket |
Single Use Threaded Fastener / Component tightening Specifications
|
NOTE:
All fasteners / components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Catalytic Converter Clamp | 12 N.m (106 lb in) |
| Exhaust Manifold Bolt (L8T) Refer to procedure for tightening sequence and torque values. |
Exhaust Manifold Replacement - Left Side (L8T) Exhaust Manifold Replacement - Left Side (L5P) , or Exhaust Manifold Replacement - Right Side (L8T) Exhaust Manifold Replacement - Right Side (L5P) |
| Exhaust Pipe Clamp | Exhaust Front Pipe Installation |
Reusable Threaded Fastener tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Catalytic Converter Brace Bracket Bolt @ Exhaust Front Bracket Lower, Upper (L5P) | 25 N.m (18 lb ft) |
| Catalytic Converter Brace Bracket Bolt @ Exhaust Front Bracket (L5P) | 22 N.m (16 lb ft) |
| Catalytic Converter Heat Shield Bolt (L5P, Long) | 10 N.m (89 lb in) |
| Catalytic Converter Heat Shield Bolt (L5P, Short) | 25 N.m (18 lb ft) |
| Exhaust Bracket Stud | 22 N.m (16 lb ft) |
| Exhaust Front Pipe Nut | 50 N.m (37 lb ft) |
| Exhaust Heat Shield Bolt | 9 N.m (80 lb in) |
| Exhaust Heat Shield Retainer | 2.5 N.m (22 lb in) |
| Exhaust Manifold Heat Shield Bolt | 10 N.m (89 lb in) |
| Exhaust Pipe Heat Shield Bolt | 10 N.m (89 lb in) |
| Exhaust System Rear Nut | 45 N.m (33 lb ft) |
| Exhaust Turbocharger Inlet Pipe Adapter Bolt | 58 N.m (43 lb ft) |
| Turbocharger Heat Shield Bolt | 10 N.m (89 lb in) |