Removal Procedure
WARNING: This page is about a different car, the 2019 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
WARNING:
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove the front tire and wheel assembly. Tire and Wheel Removal and Installation
Front Brake Hose Fitting (1) - Remove
- NOTE:
Do NOT reuse the front brake hose fitting gaskets.
Front Brake Hose Fitting Gasket (1) @ Front Brake Hose Fitting (2) - Remove and DISCARD [2x]
- Cap the brake hose fitting to prevent brake fluid loss and contamination.
- NOTE:
Do NOT use air tools to remove or install the guide pin bolts. Use hand tools ONLY.
Front Brake Caliper Guide Pin Bolt (1) - Remove [2x]
Front Brake Caliper (1) - Remove